GE11-NX (1 Heat / 1 Cool) for Gas/Electric Conventional HVAC systems

The GE11-NX single-stage thermostat will work for a large majority of the HVAC units in the marketplace.  The unit can control one (1) single stage air conditioning compressor, and one (1) gas or electric heater.

• Automatic Heat <-> Cool Changeover

• Switchable 2 or 4 Minute Minimum On/Off Time

• Short Cycle Protection

• Celsius or Fahrenheit Display

• Dual Occupied & Unoccupied Setpoints for Heat and Cool

• Remote Sensor Capability (indoor, duct and outdoor)

• Outdoor Temperature Display (requires outdoor sensor or connection to network)

• Keyboard Lockout Feature for commercial applications, includes 1 and 3 Hour Override with +/- 3 Degrees F adjustment during override

GE11-NX Data Sheet

GE11-NX Installation Guide

GE22-NX (2 Heat / 2 Cool) for Gas/Electric Conventional HVAC systems

The GE22-NX multi-stage thermostat is designed for use with more complex conventional HVAC systems.  The unit can control one (1) two-stage compressor, and one (1) two-stage gas or electric heater.

• Automatic Heat <--> Cool Changeover

• Switchable 2 or 4 Minute Minimum On/Off Time

• Dual Occupied & Unoccupied Setpoints for Heat and Cool

• Remote Sensor Capability (indoor, return, supply and outdoor)

• Outdoor Temperature Display (requires outdoor sensor or connection to network)

• Keyboard Lockout Feature for commercial applications, includes 1 and 3 Hour Override with +/- 3 Degrees F adjustment during override

HP21-NX (2 Heat / 1 Cool) for Heat Pump HVAC systems

The HP21-NX heat pump thermostat is designed for use with the majority of the heat-pump applications in the market.  The unit can control one (1) cooling stage and two (2) heating stages.  Typically, the second stage of heat is auxiliary or emergency heat.

• Automatic Heat <--> Cool Changeover

• Switchable 2 or 4 Minute Minimum On/Off Time

• Dual Occupied & Unoccupied Setpoints for Heat and Cool

• Remote Sensor Capability (indoor, return, supply and outdoor)

• Outdoor Temperature Display (requires outdoor sensor or connection to network)

• Keyboard Lockout Feature for commercial applications, includes 1 and 3 Hour Override with +/- 3 Degrees F adjustment during override

Datasheets & Instructions

HP21-NX Data Sheet

HP21-NX Installation Guide

HP32-NX (3 Heat / 2 Cool) for Heat Pump HVAC systems

The HP32-NX heat pump thermostat is designed for use with the more complex heat-pump applications in the market.  The unit can control two (2) cooling stages and three (3) heating stages.  Typically, the third stage of heat is auxiliary or emergency heat.

• Automatic Heat <--> Cool Changeover

• Switchable 2 or 4 Minute Minimum On/Off Time

• Dual Occupied & Unoccupied Setpoints for Heat and Cool

• Remote Sensor Capability (indoor, return, supply and outdoor)

• Outdoor Temperature Display (requires outdoor sensor or connection to network)

• Keyboard Lockout Feature for commercial applications, includes 1 and 3 Hour Override with +/- 3 Degrees F adjustment during override

Datasheets & Instructions

HP32-NX Data Sheet

HP32-NX Installation Guide